Figure 1. Reward. As a female patient in her 60s, full denture was installed on the upper jaw and six fixtures were installed on the lower jaw. Before first surgery.
We made tempo denture and used it to make the correct surgical stent. Moreover, through many in-depth dialogues on the final treasure molten iron, planned diagnosis and treatment were carried out.
Figure 2 ~ 3. There are aesthetic (= conical) supports on each fixture
Connection status.
Figure 4. The equipment of transfer (taped) impact copping used on estheticone abortment. Thus, sodium alginate can be used to make research casting personal tray and temporary repair.
Figure 5. Square imprest copping (copping for final impression) is installed. In order to obtain the correct impression, a block is formed with pattern resin.
Figure 6. Obtained final impace.
Figure 7-8. Master cast.
Figure 9. Installed the appearance of gold cylinder for estheticone above.
Figure 10. The recorder base is made of three gold cylinders, and the vertical mirror (intersection high mirror) is collected and installed by wax rim.
Figure 11 ~ 12. Full wax up was performed on the recorder base to form the intersection relationship and final contour in the oral cavity.
Figure 13 ~ 14. Cut back is carried out by using the index made in advance.
Figure 15. Casting, make metal frame, and use X-ray to confirm good oral fitness.
Figure 16. Ceramic opaque processing.
Figure 17. First build up.
painting First firing.
Figure 19. Second build up.
Figure 20. Second firing.
Figure 21 ~ 28. Completed ceramic bridge. This is an example of a typical screw retained implant repair.
Figure 29 ~ 34. The appearance and overall appearance of oral equipment.
